• Hello, please take a minute to check out our awesome content, contributed by the wonderful members of our community. We hope you'll add your own thoughts and opinions by making a free account!

Misc General Banter Thread

jackendrickwx said:
How much for my house
Click to expand...
As much as you want

71dDUu4u-2L._AC_SL1500_.jpg

Amazon.com: LANGXUN 1500W Snow Machine with Manual & Wireless Remote Control | Large Output Snowmaking Machine for Indoor & Outdoors | Adjustable Snowflake Size | Perfect for Christmas, Weddings, and Parties : Musical Instruments

Buy LANGXUN 1500W Snow Machine with Manual & Wireless Remote Control | Large Output Snowmaking Machine for Indoor & Outdoors | Adjustable Snowflake Size | Perfect for Christmas, Weddings, and Parties: Snow Machines - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
 
Euro for tomorrow.

sn10_acc-imp.us_ma.png
 
packfan98 said:
So for years you’ve cluttered up discussion and storm threads with banter, and now you are cluttering up the banter threads with weather maps. Make up your mind!
Click to expand...
Well, I can't post that stuff in the discussion thread like I would if I was allowed to post there. Not sure why I was restricted because I wasn't really posting banter in there for a while.
 
packfan98 said:
So for years you’ve cluttered up discussion and storm threads with banter, and now you are cluttering up the banter threads with weather maps. Make up your mind!
Click to expand...

I think Brick has made a change I think if you up him back in the normal thread he would be fine and keep the Banter in the Banter thread. Just my opinion though


Sent from my iPhone using Tapatalk
 
packfan98 said:
Unfortunately, your track record had sealed your fate for those posting privileges. How about not posting the same stuff here that’s already been posted in the discussion threads?
Click to expand...

I haven't been posting banter in the discussion thread for a while. I enjoy posting the play by play and results of the model runs. Really getting confused on what is okay and what isn't.
 
Tsappfrog20 said:
I think Brick has made a change I think if you up him back in the normal thread he would be fine and keep the Banter in the Banter thread. Just my opinion though


Sent from my iPhone using Tapatalk
Click to expand...
You may be right, but some of us have known Brick for a dozen years or more. He’s been banned and let back in on several occasions. Recently, he said that he was only here for the vibes and didn’t care about actually learning anything. Doesn’t sound like someone who should be posting in the main threads.
 
packfan98 said:
You may be right, but some of us have known Brick for a dozen years or more. He’s been banned and let back in on several occasions. Recently, he said that he was only here for the vibes and didn’t care about actually learning anything. Doesn’t sound like someone who should be posting in the main threads.
Click to expand...

Understood.


Sent from my iPhone using Tapatalk
 
packfan98 said:
You may be right, but some of us have known Brick for a dozen years or more. He’s been banned and let back in on several occasions. Recently, he said that he was only here for the vibes and didn’t care about actually learning anything. Doesn’t sound like someone who should be posting in the main threads.
Click to expand...
No, I said I care more about the end result than how it got there. Not everyone has to be so scientifically inclined to enjoy this. If I post banter in there instead of just doing the play by play and the model run results then ban me. That is what I was trying to do since I came back but for some reason I was still restricted.
 
packfan98 said:
Unfortunately, your track record had sealed your fate for those posting privileges. How about not posting the same stuff here that’s already been posted in the discussion threads?
Click to expand...
look I’m just a newbie here, but forgiveness is a virtue and something we should all strive for. Yall are in charge but it’s not like this is a decision you can’t take back if it turns out wrong.
 
BrickTamland said:
I haven't been posting banter in the discussion thread for a while. I enjoy posting the play by play and results of the model runs. Really getting confused on what is okay and what isn't.
Click to expand...
Unfortunately, the consensus from the moderator and administration crew is not in your favor. Since you’ve turned over a new leaf, there are other sites and social media outlets you can use to share your thoughts and look at your maps and memes.
 
Drizzle Snizzle said:
Easier access to the cold I guess. Georgia isn't East of the Mountains like SC and NC are.
Click to expand...

To be fair, they also benefit way more heavily when it comes to CAD because of the mountains. This is just an unusual set of storms we've had over the last couple of winters. Most likely averaged out over the next decade or so, those areas will get more snow than areas in Southern GA.
 
LovingGulfLows said:
To be fair, they also benefit way more heavily when it comes to CAD because of the mountains. This is just an unusual set of storms we've had over the last couple of winters. Most likely averaged out over the next decade or so, those areas will get more snow than areas in Southern GA.
Click to expand...
Yes when there's CAD involved the Carolinas have easier access to the cold.
 
Drizzle Snizzle said:
Easier access to the cold I guess. Georgia isn't East of the Mountains like SC and NC are.
Click to expand...
But the mountains haven't moved; it wasn't as much of a problem in decades past.
Drizzle Snizzle said:
Yes when there's CAD involved the Carolinas have easier access to the cold.
Click to expand...
Yes but it seems like we cannot get good CADs anymore.

Something in the overall patterns have changed; the orientation of frontal passages, the scarcity of blocking or of getting CAD setups, the overall amount of cold, the tough placement, the SJ strength... setups are just different and what used to work doesn't anymore. The areas that used to have an easier time just don't anymore. Latitude and altitude don't mean what they used to, until a certain point. Being at 35N and 1000ft elevation isn't superior anymore to being at 32N and 200 ft.
 
Iceagewhereartthou said:
But the mountains haven't moved; it wasn't as much of a problem in decades past.

Yes but it seems like we cannot get good CADs anymore.

Something in the overall patterns have changed; the orientation of frontal passages, the scarcity of blocking or of getting CAD setups, the overall amount of cold, the tough placement, the SJ strength... setups are just different and what used to work doesn't anymore. The areas that used to have an easier time just don't anymore. Latitude and altitude don't mean what they used to, until a certain point. Being at 35N and 1000ft elevation isn't superior anymore to being at 32N and 200 ft.
Click to expand...
Well that's your problem. You need to get CAD more involved like you used to in the old days. And then you'll be golden.
 
ducketta27 said:
Calling an over performer for the i20 corridor from AGS to CAE. I don’t know how we’re gonna do it, but we’re due… so I’m manifesting it


Sent from my iPhone using Tapatalk
Click to expand...
It just amazes me the hole from past Aiken to the rock hill area. Frosty hates us
 
51 here, which is right about where we were forecasted for our high. We've had plenty of good storms where we were this warm or warmer the day before, but not cooling off tonight is the bigger concern.
 
You must log in or register to reply here.
Back
Top